GODIAG GT100 Breakout Box OBDII Protocol Detector ECU Bench Connector OBD

The GODIAG GT100 Is A Latest Testing Platform For OBDII Protocol Communication Detection And ECU Maintenance / Diagnosis / Programming / Coding.
It Can Convert The Car OBD2 Interface Into 16 Pin For Signal Detection And Electrical Level Conversion. Able To Connect The Single Modules Or Multiple Modules Of The Vehicle. It Can Be Connected With Any Diagnostic Tool To Tell Whether The Car Communication Is Good Or Not. It Can Also Supply Power To The Car When You Change The Battery To Avoid The Vehicle Control Module Data Being Lost, Automatically Locked, The Key Remote Control Fails And The Fault Light Turns On
FUNCTIONS:
1. OBDII Protocol Detector & Communication Detection.
1). Connect GODIAG GT100 To The OBDII Diagnostic Port Of The Car.
2). When The Device Displays The Voltage, Turn On The Power Switch Of GODIAG GT100.
3). Then Connect To The Diagnostic Tool, When The Tool Is Communicating With The Car, The LED Indicator Of Corresponding Protocol Will Light Up Or Flash. (If The CAN Protocol Is Detected, It Will Have The Maximum Brightness. When The Communication Is Successful, The Corresponding CAN-H And CAN-L Will Dim Or Twinkling Weakly)
2. ECU Connection: Single Module Connection:
GODIAG GT100, Connected To A Single ECU Module, Is Convenient For A User To Do The Single-Module Diagnosis And Programming.
1). Connect The ECU With The Color Jumpers. (If The ECU Is CAN Protocol, Please Check Whether You Will Need To Connect A 120 Ohm Resistor.)
2). The Godiag GT100 Can Be Powered By Connecting To The OBDII Diagnostic Interface Of Car, Or By An AC Power Adapter.
3). To Diagnose And Program For A Single ECU By Connecting The Diagnostic Tool Or ECU Programmer.
3. Banana Plug Extension Connection:
Extend The Car’s OBDII 16pin Interface To Tell You Whether The OBDII Interface Connection Is Good Or Not, Which Is Convenient For The Test Of OBDII Interface Voltage Waveform.
4. Convert OBD1 Diagnostic Interface To The Standard OBD2:
Use The Connector To Convert The OBD1 Interface Into Obd2 Interface According To The Diagnostic Interface Communication Protocol.
5. Connect Multiple ECU Control Modules At The Same Time, Which Is Convenient For The Professional Engineers To Detect And Maintain.
6. When To Use The Extension Cables:
The Space Of The Diagnostic Interface Location Is Too Narrow To Connect To The Diagnostic Tool, Or The User Find That The Diagnostic Cable Is Not Long Enough During Maintenance. It Can Be Extended By 1.2 Meters.
7. Able To Power The Car When Replacing The Used Battery.
8. The Dedicated Adapter Will Be Released (Help GT100 Connect To The Special ECU Module) 
PACKAGE INCLUDES:
Host.
OBD 2-In-1 Extension Cable.
Colored Jumper Cable.
Power Supply 12V.
Resistance 120 Ohm.
Banana Plug.
24pcs X Wire Accessories, Dupont 2.54mm Connector Female Pins.