Autel maxidiag MD806Pro

The all-new MaxiDiag MD806 is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD806 can access Engine, Transmission, ABS, and Airbag (SRS) systems for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device.
Autel MD806 auto scan tool can scan ABS, SRS(airbag), Engine(ECM) and Transmission(TCM/Trans) systems to read and clear fault codes, view live data stream of multiple sensors. This car diagnostic scanner can help mechanics or DIYers to locate misfire cause, malfunctioning injector, check transmission oil temperature and pinpoint why the check engine light, ABS, airbag warning lights are on!
7 Reset Services-Autel MD806 car diagnostic scanner can perform most commonly used service resets including Oil Reset, EPB Reset, SAS Reset, DPF Regeneration, Battery Registration, Throttle Relearn, Air Fuel Ratio Reset. Note: Service resets do not work on all cars.
All 10 Modes of OBD2 Tests and; Diagnostic Report Printing- Autel MD806 OBD2 scan tool can perform all 10 modes of OBD2 tests, including read clear codes, view live data, smog check, view freeze frame data, O2 monitor test, on-board monitor test, component test, module present, view vehicle information. MD806 scanner tool allows printing out diagnostic report for further review and analysis.
Support Read/Clear Codes and Live Data functions for Engine, Transmission, ABS, and Airbag (SRS) systems. Read and clear trouble codes, control, and test BMS/Oil Reset/ SRS/EPB/DPF systems. Support oil service reset
Support battery registration and reset. Diesel particulate service including forced regeneration. Reset service mileage and service intervals. Turn off ECU brake warning light. Perform O2 monitor, on-board monitor, I/M readiness and component testing
Print diagnostic reports via PC connection. Global OBD II coverage for U.S. domestic, Asian and European makes and models. All OBD II protocols, all 10 test modes, and enhanced OBD II mode 6 support.
Work on most 1996 and newer vehicles (OBDII & CAN)
ABS
An anti-lock braking system (ABS) is an automobile safety system that allows the wheels on a motor vehicle to maintain tractive contact with the road surface according to driver inputs while braking, preventing the wheels from locking up (ceasing rotation) and avoiding uncontrolled skidding. An ABS warning lamp that is on usually means trouble and you need to pull the code to figure out what is wrong. The MD806 scan tool provides convenient service to read and erase codes for the ABS system.
EPB
The EPB is a system which controls the brake force by pulling the parking cable as in conventional existing parking brakes. EPB system includes a DC motor, a gearbox, a screw, a nut, a current sensor, a Hall-effect force sensor, an acceleration sensor and an ECU.
Oil Reset
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use.An oil change is required whenever indicated by the display and according to the recommended maintenance schedule.
BMS
The purpose of the BMS is to promised safe and reliable battery operation by monitoring and evaluating the battery states, including state of charge, state of health, and state of life, controlling the charging and discharging of the battery, balancing the cell etc. As an electrochemical product, a battery acts differently under different operational and environmental conditions
SAS
SAS measures the rotation angle, angle velocity and direction of the steering wheel, providing information on the direction in which the driver wishes to go. Steering angle sensors are required for systems such as ESC and are also used in electric power steering and active steering systems (EPS or AFS) aswell as parking assistance systems and curve lightsystems
There are three options available when accessing the Scansection:
1.Auto Scan–starts auto scanning the statuses and DTCs of all available systems on the vehicle
2.Control Unit–displays a selection menu of all available units of the test vehicle
3.Vehicle Information –shows the information of the test vehicle
Read Codes
Can be done with the key on engine off (KOEO) or with the key on engine running (KOER).This function is used to read the detailed information of a particular diagnostic trouble code for techniciansto better solve the problem.
Erase Codes
Is performed withkey on engine off (KOEO). This function is used to delete diagnostic trouble code when the fault the caused the specific DTC is fixed.
Live Data
In this function, you can not only read the live data but also record data for later review.
View Data
The View Data function allows viewing of live or real time PID data of vehicle’s computer module(s).
Freeze Frame Data
Allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. For example, the parameters may include engine speed (RPM), engine coolant temperature (ECT), or vehicle speed sensor (VSS) etc. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
I/M Readiness
Function is used to check the operations of the Emission System on OBDIIcompliant vehicles. It is an excellent function to use prior to having a vehicle inspected forcompliance to a state emissionprogram.
NOTE: ABS/SRS/ENGINE/Transmission system Diagnosis of MD806 DO NOT work on all vehicles from 1996.
Specifications:
Display: 2.8"" TFT color display (320x240 dpi)
Operating Temp.: 0 to 60 ? (32 to 140 ?)
Storage Temp. : -20 to 70 ? (-4 to 158 ?)
Dimensions (LxWxH) : 100mm (3.94”) x 200mm (7.87”) x 37.5mm (1.48”)
Weight: 0.26 kg (0.57 lb.)
What's in the box
1 x Scanner
1 x Hard Case
1 x OBD2 Cable
1 x Manual